• Tweet
  • Partager

DBX 376 Préamplificateur micro mono


The standard of excellence for channel strip processors has just been raised once again. From the world leader in digital signal processing comes the new 376 Tube Channel Processor with digital output capabilities. dbx® Professional Products has been paving the way for audio excellence for more than 25 years, and with the creation of the 376, the drive continues. The 376 has taken the essential tools neededfor channel strip processors and has greatly added to the feature list, making it an all inclusive toolbox that offers all of the effects required. With an effect menu list that includes such standard features as: a tube preamp section, 3-Band parametric EQ section, Compressor, De-Esser and digital outputs, the 376 is the perfect companion piecefor recording and tracking vocals and mic?d applications in the analog and digital domain.
The 376 Tube Channel Strip w/Digital Output is the latest addition to the Silver Series family. The 376 puts the best of both worlds into one affordable package by combining the warmth of the vacuum tube, with the proprietarydbx Type IV® conversion system. The 376 boasts many of the same features as other products in the Silver Series, such as +48V phantom power, a phase invert switch, and low cut filtering. In addition, the 376 also offers digital output capabilities in both AES/EBU, and S/PDIF formats as standard features. The high impedance, 1/4" instrument input located on the front panel, as well as the mic/line switch, and 20 dB pad show our dedication toproviding convenience in the studio. The LED meters provide a clear and concise visual of the signal processing at a glance. The rear panel includes both mic and line inputs and outputs, word clock sync input and output, insertion jack and digital outputs. Add selectable sampling rates of 44.1 kHz, 48 kHz, 88.2 kHz, or 96 kHz; selectable dithering and noise shaping; and separate analog and digital output controls to this already impressive
list of features, and we think you?ll agree that the 376 lives up to the uncompromising       standards of dbxProfessional Products.


Connector: Female XLR Pin 2 Hot
Type: Electronically balanced/unbalanced
Impedance: 330 ohm
Max Input Level: -9 dBu or +11 dBu with 20 dB pad engaged
CMRR: >40dB, Typically 55dB
Equivalent Input
Noise: Typically -120 dBu with a 150 Ohm source load, 20Hz to 20kHz BW
Connectors: TRS 1/4" Jack
Type: Electronically balanced/unbalanced
Impedance: 20kOhm unbalanced, 40kOhm balanced
Maximum Input Level: +21dBu balanced or unbalanced
CMRR: >40dB, Typically 55dB
Gain (Drive Control): -15dB to +15dB
Connector: TS 1/4" Jack
Type: Unbalanced
Impedance: 470kOhm
Maximum Output
Level: >+21 dBu unbalanced
Connector: Male XLR Pin 2 Hot and TRS 1/4"
Type: Servo-balanced/unbalanced
Impedance: Balanced 120 Ohm, unbalanced 60 Ohm
Maximum Output
Level: >+21 dBu, >+20 dBm (into a 600? load)
Connector: TRS 1/4"
Type: Unbalanced
Impedance: 100? (SEND), 20k? (RETURN)
Connector: XLR for AES/EBU
Impedance: 110 Ohm for AES/EBU
75 Ohm for S/PDIF
Connectors: BNC
Input Impedance: 75? terminated by internal jumper
Input: 96, 88.2, 48, or 44.1kHz word clock
OUTPUT: 96, 88.2, 48, or 44.1kHz word clock
DRIVE Control Range: +30dB to +60dB for Mic Input
-15dB to +15dB for Line and Instrument Inputs
Output Level Control
Range: -20dB to +20dB
LINE: Selects between microphone and line inputs
Phantom Power: +48V
PAD: 20dB pad
PHASE: Reverses pins 2 and 3 of the microphone input XLR
LOW CUT: 75Hz, 12dB/octave high pass filter
Analog Frequency
Response: <10Hz to 75kHz
THD + Noise: 0.35% typical at +4dBu out, 1kHz, 40 dB gain
LOW Frequency: 80 Hz, shelving filter
HIGH Frequency: 12 kHz, shelving filter
MID Frequency: Sweepable from 100 Hz to 8 kHz, bandwidth 1.5 octaves
Gain (all bands) Sweepable from ?15 to +15 dB
Threshold Range: -40 dBu to +20 dBu
Characteristic: Selectable OverEasy® or Hard Knee
Compression Ratio: Variable; 1:1 to Infinity:1; 60 dB maximum Compression
Attack Time: Program-dependent; Typically 5 ms (SLOW disabled), 15 ms (SLOW enabled) for 15 dB Gain Reduction
Release Time: Program-dependent; Typically 50 dB/sec (SLOW disabled), 8 dB/sec (SLOW enabled)
Characteristic: Wideband gain reduction
Frequency Range: 800 Hz to 10 kHz High Pass
Release Time: 12 dB/octave program-dependent; approximately 1 ms/dB
Type: dbx® Type IV® A/D Conversion System
Sample Rate: 96, 88.2, 48, or 44.1kHz selectable
Wordlength: 24, 20, or 16 bit selectable
Dither Type: TPDF, SNR2, or none
Noise Shape: Shape 1, Shape 2, or none
Output Format: S/PDIF or AES/EBU
Convertor Dynamic
Range: 107dB typical, A-weighted, 22kHz bandwidth
Operating Voltage: DO: 120VAC 60Hz, 100VAC 5

Ref: DBX-376
Produit précedentProduit suivant
Les commentaires des utilisateurs :
Vous devez vous connecter ou créer un compte pour ajouter un commentaire.
Cliquez ici pour vous connecter